Policy based routing (PBR)

Scenario: Our aim is to configure the firewall such that all the traffic from 192.168.1.52 will flow from WAN2 and the remaining will flow from WAN1.

Step1. We first need to configure the basic LAN and WAN configurations.

Step2.

 Policy based routing will take precedence over static routing.

To configure  policy route go to,

Router->Static->Policy Route click create new

Step3. Now we need to create a policy from internal to WAN1

By default one policy from internal to WAN1 would be there, and if not then we need to configure it. Firewallà Policy

Step4. Similarly we also need to create the same policy through WAN2 also.